HP 316095-B21 FW 08.01.00 McDATA EFCM Basic User Manual (620-000240-000, Novem - Page 101

Creating and Modifying a Zone 4 • A zone set name cannot contain spaces. • Valid characters are alphanumerics and the caret ( ^ ), hyphen ( - ), underscore ( _ ), or dollar ( $ ) symbols. • A zone set name can have a maximum of 64 characters. NOTE: A product can have at most 1024 zones. Add zone members as described in Add Zones Members to a Zone on page 4-15. Add Zones Members to a Zone Use the Potential Zone Members panel to add members to the zone. You can add members using the list of Attached Nodes or use the New Member dialog. • Attached Nodes-You can use the arrow buttons between the panels to move selected nodes between this list and the Pending Zone Members list. You can select one item or multiple. This list is automatically populated at all times with the complete list of attached nodes. • New Members-Add a new member either by the combination of domain ID and port number, or by WWN as follows: - Domain ID and port number-Select the radio button next to the Domain field. Put the domain ID in the Domain field and the port number in the Port field. Click the Add button to add the new zone member to the Pending Zone Members list. - WWN-Select the radio button next to the WWN field. Type the WWN of the new zone member in the field. Click the Add button to add the new zone member to the Pending Zone Members list. NOTE: Changes to a zone or zoning configuration are not saved and activated on the product until saved as part of a zone set. See Create a Zone Set on page 4-17 for procedures. Configuring Zoning 4-15