HP 316095-B21 FW 08.01.00 McDATA EFCM Basic User Manual (620-000240-000, Novem - Page 161

Viewing Syslog Configuration 6 • Delete syslog recipients from the list, which is described in Delete Syslog Recipients on page 6-20. • Identify which logs are sent to recipients, which is described in Specify Which Logs Are Sent to a Recipient on page 6-20. Enable and Disable Syslogs Sending syslogs to recipients is disabled by default. To enable this functionality, select the Enable button. To disable sending syslogs, select the Disable button. Add a Syslog Recipient The Recipients part of the page shows the clients that the product is configured to send syslogs to. The interface allows a maximum of three syslog recipients. To add an entry to the list, select the New button. The Recipient Properties dialog becomes active. Specify the IP address of the syslog recipient in the IP Address field. Select a facility for the syslog recipient by choosing a listing from the Facility drop-down list. The facility classifies syslog messages by severity and maps to severity level of events on the product. Specifying a level means that messages at that level and all of greater severity are logged. Valid values for Facility and their meaning are shown in Table 6-1. Table 6-1 Facility Code Levels Syslog Severity Level Message Facility Code Local 0 Emergency: system is unusable Local 1 Alert: action must be taken immediately Local 2 Critical: critical conditions Local 3 Local 4 Local 5 Local 6 Local 7 Error: error conditions Warning: warning conditions Notice: normal but significant condition Informational Debug: debug-level messages E/OS Security Log Level N/A N/A Error N/A N/A Change Informational N/A Viewing System Logs 6-19