HP 316095-B21 FW 08.01.00 McDATA EFCM Basic User Manual (620-000240-000, Novem - Page 105

Configuring the Zone Set 4 Delete Zones From the Zone Set Deleting a zone set deletes the zone from system memory. When a zone set is deleted, it is no longer available for configuration. Use the following procedure to delete zones from the zone set: 1. Select a zone listed in the Zone Set panel. 2. Select the Delete button. 3. Save the zone set changes by selecting the Update button. Once you select the Update button, the deletion of the zone cannot be canceled. NOTE: The zone set change is not active on the fabric until you select the Activate button. For more information, see Activate and Cancel the Zone Set Changes on page 4-19. Change a Zone that is in the Zone Set The Zone Name panel is used to configure a zone. In order to make changes to a zone that is in the zone set, you must move the zone to the Zone Name panel. The arrow buttons between the Zone Name and Zone Set panels are used to move zones between the panels. Use the following procedure to change a zone that is in the zone set: 1. Select a zone listed in the Zone Set panel. 2. Use the arrow buttons between the panels to move the zone into the Zone Name panel. 3. Make the desired changes to the zone as described in Creating and Modifying a Zone on page 4-14. 4. When you have completed changing the zone, use the arrow buttons between the panels to move the zone into the Zone Set panel. 5. Save the zone set by selecting the Update button. NOTE: The zone set is not active on the fabric until you select the Activate button. For more information, see Activate and Cancel the Zone Set Changes on page 4-19. Activate and Cancel the Zone Set Changes Changes to zoning made on the Zoning page are not activated on the fabric until the Activate button is selected. The Activate button highlights whenever the zone set shown on the page is different from the zone set currently active on the fabric. Changes to the zone set are Configuring Zoning 4-19