HP 316095-B21 FW 08.01.00 McDATA EFCM Basic User Manual (620-000240-000, Novem - Page 41

Health Status Information Viewing the Port List 2 • ISL connection not allowed on this port • ELP rejected by the attached switch • Incompatible switch at other end of the ISL • External loopback adapter connected to the port • N_Port connection not allowed on this port • Incompatible non-McDATA switch at other end of the ISL • ISL connection not allowed to external Fabrics • Port binding violation - unauthorized WWN • Unresponsive node connected to Port - If Operational State is Inactive: • No Serial Number • No Key Enabled • Switch Speed Conflict • Optics Speed Conflict (64-Port and 140-Port Directors only) • No SBAR Support (64-Port and 140-port Directors only) If you select the entry for a port in the Health Status column, Predictive Optics Monitoring (POM) information displays. POM data for the selected port appears in the lower part of the page: • Port Number-Product port number. • Health Status-Condition of the installed optical transceiver (Normal, Warning, Alarm, or No Info). • Transceiver Type-Installed transceiver type (SFP, XFP, or Unknown). If the port has a digital diagnostics (DD) enabled optical transceiver installed, product firmware displays a table of reported temperature, voltage, current, transceiver power, and receiver power (Figure 2-3 on page 2-10). Optical transceivers also provide vendor-specific threshold values for these parameters. Viewing Product Information 2-9