HP 316095-B21 FW 08.01.00 McDATA EFCM Basic User Manual (620-000240-000, Novem - Page 140

Enabling and Disabling Safe Zoning Mode 5 • Enter the WWN to which the port is to bind in the Bound WWN column. The WWN must be entered as hex digits, all uppercase, and you must use a colon to separate digits. • Click the check box in the Attached column. This option is valid only if a WWN is present in the Attached WWN column for the port. (The Attached WWN column indicates the WWN that is currently attached to the port, but is not bound to it.) ATTENTION! If the Port Binding check box is checked, and a WWN is not specified for binding, no devices can attach to the port. 3. Click the OK button at the bottom of the screen to activate the configuration changes. Enabling and Disabling Safe Zoning Mode Perform this procedure to enable or disable Safe Zoning Mode for the product. When this option is selected, zone merges are prohibited and default zoning is prohibited, if the zone name and zone members in the zone set are not identical. To enable the Safe Zoning Mode, select the Safe Zoning Mode check box on the Security menu (Figure 5-11). To disable the Safe zoning Mode, clear the Safe Zoning Mode check box on the Configure menu. Figure 5-11 Security Menu 5-34 EFCM Basic User Manual