HP 316095-B21 FW 08.01.00 McDATA EFCM Basic User Manual (620-000240-000, Novem - Page 106

Configuring the Zone Set 4 Deactivate the Active Zone Set State of the Default Zone not activated on the fabric until the user activates the changes. Instead, the changes remain local to the product. Selecting the Cancel button clears all changes to the zone set. When the Cancel button is selected, the configuration dialogs show active zone set information. The state of the zone set is shown in the Active State field. This field has the following values: • Active-Indicates that a zone set is active in the fabric. (The active zone set may not be the same as the one shown in the Zone Set panel.) • Inactive-Indicates that no zone set is active on the fabric. When a zone set is active, the Deactivate button is enabled. Select the Deactivate button to make the zone set inactive. This action removes the current zone set from the Fabric and places all attached devices into the Default Zone. The state of the default zone is shown in the Default Zone field. This field has the following values: • Enabled-Indicates that the default zone is enabled in the fabric. All devices and ports not configured as members of the active zone set are able to communicate. • Disabled-Indicates that the default zone is disabled in the fabric. All devices and ports not configured as members of the active zone set cannot communicate. When the default zone is enabled, select the Disable button to disable it. When the default zone is disabled, select the Enable button to enable it. NOTE: Enabling the default zone while a zone set is active places all attached devices not currently in an active zone into the default zone. 4-20 EFCM Basic User Manual