HP 316095-B21 FW 08.01.00 McDATA EFCM Basic User Manual (620-000240-000, Novem - Page 72

Configuring OSMS and Host Control 3 Figure 3-10 CLI Configuration Page 2. Select the Enable button to enable the CLI. Select the Disable button to disable the CLI. 3. Enable SSH by selecting the Use SSH check box. Disable SSH by clearing the check box. Click OK to activate the SSH change. NOTE: The default method is Telnet, which means that data is not encrypted between the user and the product. By enabling SSH, data, such as the user ID and password, is encrypted between the user and the product. It is recommended that you enable SSH to ensure that data such as user IDs and passwords are encrypted when users use Telnet to access a product. Also, if you enable SSH, Telnet function is disabled. 4. If you need to reset the SSH host public/private keys, select the Reset the SSH Keys button. NOTE: Resetting the SSH host public/private keys is a task that should be performed based on your company's Information Technology (IT) policy. When you reset the keys, you reset both the public and private keys. Resetting the keys is usually performed if there is a concern that the keys have been compromised or if your company's IT policy requires the keys to be reset on a regular basis. Do not reset the keys unless you have consulted with or been instructed to by your network administrator. Configuring OSMS and Host Control Perform this procedure to enable or disable OSMS and host control of the product through EFCM Basic. OSMS is a feature that allows host control and inband management of the director or switch through a management application that 3-20 EFCM Basic User Manual