HP 3380 Service Manual - Page 156
Face-up roller output roller, Reinstallation tip,
View all HP 3380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
2. Remove two screws (callout 1) on the fuser, and lift the face-down delivery assembly away from the fuser assembly. 1 Figure 5-68. Remove the output rollers (1 of 2) Face-up roller (output roller) 1. Turn the fuser assembly over. 2. Remove the gear (callout 1) from the face-up roller, and release the tab (callout 2) on the face-up roller bushing. 3. Rotate the face-up roller bushing forward until the pin releases. 4. Slide the face-up roller away from the gear side, and lift it out of the fuser assembly. 1 2 Figure 5-69. Remove the output rollers (2 of 2) Reinstallation tip Flex the face-up roller bushing to pop the pin into place. 140 Chapter 5 Removal and replacement ENWW
2.
Remove two screws (callout 1) on the fuser, and lift the face-down delivery assembly
away from the fuser assembly.
1
Figure 5-68.
Remove the output rollers (1 of 2)
Face-up roller (output roller)
1.
Turn the fuser assembly over.
2.
Remove the gear (callout 1) from the face-up roller, and release the tab (callout 2) on the
face-up roller bushing.
3.
Rotate the face-up roller bushing forward until the pin releases.
4.
Slide the face-up roller away from the gear side, and lift it out of the fuser assembly.
1
2
Figure 5-69.
Remove the output rollers (2 of 2)
Reinstallation tip
Flex the face-up roller bushing to pop the pin into place.
140
Chapter 5
Removal and replacement
ENWW