HP 3380 Service Manual - Page 162
CAUTION, Remove the paper lift-plate assembly 1 of 4
View all HP 3380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
CAUTION 3. Remove the solenoid clutch gears (callout 1) by releasing the locking tab inside of the printer (callout 2) and sliding the gears off of the shaft and away from the left side of the product. The solenoid clutch gear assembly is made up of two gears with a small compression spring between them. Do not separate these gears when removing them or you might lose the spring. 2 1 Figure 5-78. Remove the paper lift-plate assembly (1 of 4) 4. Release the locking tab (callout 3) on the pickup-roller shaft and slide the shaft toward the right until the left end releases. 3 Figure 5-79. Remove the paper lift-plate assembly (2 of 4) 146 Chapter 5 Removal and replacement ENWW
3.
Remove the solenoid clutch gears (callout 1) by releasing the locking tab inside of the
printer (callout 2) and sliding the gears off of the shaft and away from the left side of the
product.
CAUTION
The solenoid clutch gear assembly is made up of two gears with a small compression spring
between them.
Do not
separate these gears when removing them or you might lose the
spring.
1
2
Figure 5-78.
Remove the paper lift-plate assembly (1 of 4)
4.
Release the locking tab (callout 3) on the pickup-roller shaft and slide the shaft toward the
right until the left end releases.
3
Figure 5-79.
Remove the paper lift-plate assembly (2 of 4)
146
Chapter 5
Removal and replacement
ENWW