HP 3380 Service Manual - Page 164
To reinstall the paper lift-plate assembly,
View all HP 3380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
7. If you want to remove the pickup roller shaft, carefully angle the left side outward. Figure 5-82. Remove the pickup roller shaft Reinstallation tip Be sure that the clutch on the pickup roller shaft is aligned with the follower (the large plastic tab) on the paper lift-plate. To reinstall the paper lift-plate assembly Make sure that the vertical paper sensor (the narrow, black, plastic piece to the left of the separation-pad arm) is in an upright position. Also, make sure that the two springs are correctly positioned under the plate. The springs rest under the lift-plate and encircle the metal tabs shown in the picture (callouts 1 and 2). Figure 5-83. Paper lift-plate springs 148 Chapter 5 Removal and replacement ENWW
7.
If you want to remove the pickup roller shaft, carefully angle the left side outward.
Figure 5-82.
Remove the pickup roller shaft
Reinstallation tip
Be sure that the clutch on the pickup roller shaft is aligned with the follower (the large
plastic tab) on the paper lift-plate.
To reinstall the paper lift-plate assembly
Make sure that the vertical paper sensor (the narrow, black, plastic piece to the left of the
separation-pad arm) is in an upright position. Also, make sure that the two springs are
correctly positioned under the plate. The springs rest under the lift-plate and encircle the
metal tabs shown in the picture (callouts 1 and 2).
Figure 5-83.
Paper lift-plate springs
148
Chapter 5
Removal and replacement
ENWW