HP 6100 EMULEX EZPilot EVA Version 2.0 User Manual (5697-6961, July 2007) - Page 34
Viewing an HBA’s Firmware Information, EZPilot - Management
View all HP 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Viewing an HBA's Firmware Information Use the Maintenance tab to view a selected HBA's firmware information, update its firmware and enable or disable its BootBIOS. Note: You must select Advanced Mode from the View menu to see the Maintenance tab for a selected HBA. Figure 24: The EZPilot HBA Maintenance tab (Host View) in Advanced Mode The Firmware area of the Maintenance tab displays the following information: • Current Firmware Version - The Emulex firmware version number for the selected HBA. • Operational Firmware Name - If visible, the name of the firmware that is operational. • Initial Firmware - The version of the firmware stub responsible for installing the SLI code into its proper slot. • SLI-1 Firmware Name - The name and version of SLI-1 firmware installed in the selected adapter. • SLI-2 Firmware Name - The name and version of SLI-2 firmware installed in the selected adapter. • SLI-3 Firmware Name - The name and version of SLI-3 firmware installed in the selected adapter. • Kernel Version - The version of the firmware responsible for starting the driver. The BootBIOS area of the Maintenance tab displays the following information: • BootBIOS - The BootBIOS version running on the selected HBA. If BootBIOS is not present on the HBA, the field displays the word "Disabled". The Maintenance tab buttons • Update Firmware - Click this button to update firmware/BIOS on the selected HBA. See "Updating Firmware or BIOS on an HBA" on page 31 for instructions. EZPilot - Management Section Page 30