HP 6100 EMULEX EZPilot EVA Version 2.0 User Manual (5697-6961, July 2007) - Page 42

The Storage Management Interface area of the General tab displays the following information: • Name - The name of the storage management interface being used to manage the selected storage device. • Version - The version of the of the storage management interface being used. The Storage Device Summary area of the General tab displays the following information: • Device Name - The name of the storage device. • Device Identifier - The storage vendor's unique device identifier. • Device Status - The current status of the selected storage device. • Device Health - The health of the selected storage device. States are healthy, rebuilding, failing or failed. • Rebuild Priority - The priority set for rebuilding a failed disk versus handling I/O requests. • Number of Logical Drives - The number of logical drives currently allocated on the selected storage device. • Number of Controllers - The number of controllers installed in the selected storage device. • Number of Buses - The number of buses (or channels) to the physical disks in the storage device. • Capacity - The total storage space on the selected storage device. • Number of Physical Disks - The total number of physical disks (including spares) installed in the selected storage device. • Max. Number of Controllers - The maximum number of controllers that can be installed on the selected storage device. • Maximum Slots Per Bus - The maximum number of slots (one per physical disk) available on each bus. • Unallocated Space - The unallocated amount of storage space on the storage device. Note: Not all of this space is necessarily available to create or expand logical drives. The Storage Device Controllers area of the General tab displays the following information: • Controller Identifier - The controller's unique device identifier. • Status - The current status being reported by the selected storage device. • Health - The health of the selected storage device. States are healthy, rebuilding, failing or failed. • Number of Ports - The number of FC ports on the controller. • Number of Logical Drives - The number of logical drives currently allocated on the selected storage device. General tab buttons • Controller Ports - Click this button to view information about a selected controller port. See "Viewing a Controller's Port Information" below for more information. Viewing a Controller's Port Information Using the General tab, you can also view a controller's port information, including the controller port's name, identifier, WWPN, Status and so on. To view a controller's port information: 1. From the discovery-tree, select a storage device. The General tab is displayed. EZPilot - Management Section Page 38