HP 8550dn HP Color LaserJet 8550, 8550N, 8550DN, 8550GN, 8550MFP Printer - Qui - Page 15

Control Panel Message DRUM ERROR REPLACE KIT DRUM LIFE LOW REPLACE KIT DRUM LIFE OUT REPLACE DRUM KIT DUPLEX ERROR CHECK DUPLEXER FACE UP OUTPUT BIN FULL FUSER LIFE LOW REPLACE KIT FUSER LIFE OUT REPLACE KIT INPUT DEVICE PAPER PATH OPEN Description The printer has detected an error in the imaging drum. The imaging drum is almost past its specified life. The imaging drum is past its specified life. The printer has detected an error in the duplexer preventing two-sided printing. The top output bin of the multi-bin mailbox is full. The fuser is almost past its specified life. The fuser and paper rollers are past their specified life. The media transfer door on tray 4 is open. Recommended Action Printing cannot continue until the drum kit has been replaced. See the installation guide included with the drum kit. Although printing can continue, the drum kit should be replaced for optimum printer operation. See the installation guide included with the drum kit. Printing cannot continue until the drum kit has been replaced. See the installation guide included with the drum kit. Remove the duplexer. Check for and remove any jammed media from the duplexer and reinstall the duplexer. Remove all media from the top output bin on the multi-bin mailbox. Although printing can continue, the fuser should be replaced for optimum printer operation. See the installation guide included with the fuser kit. Replace the fuser kit and reset the fuser counter before attempting to print. See the installation guide included with the fuser kit. Close the media transfer door. EN Control Panel Features 11