HP 8550dn HP Color LaserJet 8550, 8550N, 8550DN, 8550GN, 8550MFP Printer - Qui - Page 19
Too Many S
UPC - 088698946428
View all HP 8550dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Control Panel Message TONER LOW REPLACE TONER OUT REPLACE TOO MANY PAGES IN JOB TO STAPLE TOP OUTPUT BIN FULL TRANSFER KIT LOW REPLACE KIT TRANSFER KIT OUT REPLACE KIT TRAY 1 CONTAINS UNKNOWN MEDIA TRAY 1 LOAD EN Description The printer is almost out of the specified toner. can be cyan, magenta, yellow, or black. The printer is out of the specified color of toner. can be cyan, magenta, yellow, or black. The job height is greater than the stapler capacity. The height of the job to be stapled should not exceed 5 mm. The top output bin on the printer is full. The transfer drum, transfer belt, cleaning roller, and filters are almost past their specified life. The transfer drum, transfer belt, cleaning roller, and filters are past their specified life. Media was stacked in tray 1 for continuous manual feed printing and the job has been completed. However, media remains in tray 1. Tray 1 is considered to be not configured. There is a user request for a media size that is not currently installed in tray 1. Recommended Action Although printing can continue, the toner cartridge should be replaced for optimum printer operation. See the installation guide included with the toner cartridge. Printing cannot continue until the specified toner cartridge has been replaced. See the installation guide included with the toner cartridge. See the stapling specifications in the user guide for more information. Remove all media from the top output bin. Although printing can continue, the transfer kit should be replaced for optimum printer operation. See the installation guide included with the transfer kit. Replace the transfer kit and reset the transfer counter before attempting to print. See the installation guide included with the transfer kit. Configure the media type for tray 1 or remove the remaining media. See "Configuring Media Type and Size" on page 32. Load the media type and size specified on the display. After loading the tray, the printer brings itself online. Control Panel Features 15