HP 8550dn HP Color LaserJet 8550, 8550N, 8550DN, 8550GN, 8550MFP Printer - Qui - Page 18

Control Panel Message POWERSAVE ON PROCESSING COPY OF SEPARATOR OUTPUT BIN FULL STACKER OUTPUT BIN FULL STAPLER LOW ON STAPLES STKR: ATTACH TO PRINTER STKR: CLOSE STAPLER DOOR STKR: DETACH AND CLEAR JAM 13.xx Paper Jam alternates with STKR: DETACH AND CLEAR STAPLE JAM STKR: TRAY OVERLOAD alternates with CLEAR PAPER FROM OPTIONAL BIN 1 Description Recommended Action The printer is in power save mode. Clear this message by pressing any key or by sending a print job to the printer. The printer is processing a proof and print or mopy print job. No action is required. The multi-bin mailbox output bins are full. Remove all media from the output bins on the multi-bin mailbox. The multi-bin mailbox output bins are full. Remove all media from the output bins on the multi-bin mailbox. The Stapler Cartridge has 20 to 50 staples remaining. No action required. The device is not attached to the printer properly. Make sure that there is a proper attachment between the device and the printer, and wait for a solid green status light on the user LED on the device. The Stapler door is open or it is not closed properly. Close the Stapler door properly. A paper jam occurred in the device. Clear the paper jam. A staple jam occurred. Open the Stapler door, and clear the paper or staple jam. The weight capacity of the stacker bin has been reached. Clear the paper from the Stacker Bin. EN Control Panel Features 14