HP DL560 HP ProLiant DL560 Server User Guide - Page 102

102 HP ProLiant DL560 Server User Guide The operating system loads to complete the boot process. If the server completes POST and attempts to load the operating system, refer to "Problems After Initial Boot (on page 106)." Diagnostic Steps If the server does not power up, or powers up but does not complete POST, answer the questions in the following table to determine appropriate actions based on the symptoms observed. According to the answers you give, you are directed to the appropriate table. That table outlines possible reasons for the problem, options available to assist in diagnosis, possible solutions, and references to other sources of information. Question Question 1: Is the system power LED amber? Question 2: Is the system power LED green? Question 3: Is the external health LED green? Question 4: Is the internal health LED green? Question 5: Is the monitor displaying information? Action If yes, press the Power On/Standby button and then continue to question 2. If no, refer to "Is the System Power LED Amber? (on page 103)." If yes, continue to question 3. If no, refer to "Is the System Power LED Green? (on page 104)." If yes, continue to question 4. If no, refer to "Is the External Health LED Green? (on page 104)." If yes, continue to question 5. If no, refer to "Is the Internal Health LED Green? (on page 105)." If yes, use the POST messages for further diagnosis. If no, refer to "Is the Monitor Displaying Information? (on page 106)."