HP DL560 HP ProLiant DL560 Server User Guide - Page 84
Using RBSU, Auto-Configuration Process, HP ROM-Based Setup Utility User, Guide
UPC - 808736876919
View all HP DL560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
84 HP ProLiant DL560 Server User Guide For more information on RBSU, refer to the HP ROM-Based Setup Utility User Guide on the Documentation CD or the white paper on the HP website (ftp://ftp.compaq.com/pub/products/servers/management/rbsu-whitepaper.pdf). Using RBSU The first time you power up the server, the system prompts you to enter RBSU, select an operating system, and select a language. Default configuration settings are made at this time and can be changed later. Most of the features in RBSU are not required to set up the server. To navigate RBSU, use the following keys: • To access RBSU, press the F9 key during power up. • To navigate the menu system, use the arrow keys. • To make selections, press the Enter key. IMPORTANT: RBSU automatically saves settings when you press the Enter key. The utility does not prompt you for confirmation of settings before you exit the utility. To change a selected setting, you must select a different setting and press the Enter key. Auto-Configuration Process The auto-configuration process automatically runs when you boot the server for the first time. During the power-up sequence that occurs, the system ROM automatically configures the entire system without needing any intervention. During this process, the ORCA utility, in most cases, automatically configures the array to a default setting based on the number of drives connected to the server.