HP Designjet 510 HP Designjet 510 Printer series - Quick Reference Guide - Page 11

basic operations Unloading a roll of paper To cut the roll, press the Form Feed and Cut key on the front panel. Use caution when performing this procedure as an image which has had insufficient time to dry could get damaged. To unload a roll from the printer: select Unload roll from the front-panel Paper menu; lift the blue paper lever; pull the paper through to the back of the machine until it is free; wind the paper back onto the roll; then lower the blue lever. The front panel displays Open window. 4 Open the window; the vacuum-which will hold the paper in place-comes on. 5 The front panel displays Lift blue lever. 6 Lift the blue lever up to lift the rollers. 7 The front panel displays: Loading a sheet of paper 1 Select the Paper menu and press Enter. 2 Select Load sheet and press Enter: 3 Select paper type and press Enter. Unloading a roll of paper 11