HP Designjet 510 HP Designjet 510 Printer series - Quick Reference Guide - Page 20
Troubleshooting, Either, Enter, Cancel, Create pattern - parts
View all HP Designjet 510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Message Explanation and action Printhead warning A problem has occurred with one or more printheads. The printheads are still Poor print quality functional. The problem was detected either during printhead alignment or during troubleshooting. If you have completed the routine, the system was unable to clean the printheads fully. You should use the Troubleshooting routine to correct any image quality problems that may be apparent; alternatively, you should replace the printheads (see page 23). Roll edge not found During the loading of a roll, the printer cannot detect the side edge of the paper. A Please check roll edges are possible cause is that the paper is transparent (clear); only opaque paper types are non-clear Press ENTER to retry Press CANCEL to abort supported. Either: Press the Enter key to restart the loading procedure; Or: Press the Cancel key to cancel paper loading. Sheet not loaded The printer is trying to perform a scan of the calibration pattern, but no sheet was Load sheet with printed pattern found. Load the sheet that was printed by the Create pattern part of the calibration routine. 20 Front-panel error messages