HP Designjet 70 HP Designjet 70 Printer Series - Quick Reference Guide - Page 32
How do I align printheads? - maintenance
View all HP Designjet 70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
HP Designjet 70/110plus Printer series-Quick Reference Guide How do I align printheads? If the printheads are not correctly aligned, poor quality printing will result. To align printheads, you need to use the HP Designjet System Maintenance utility. This is normally installed when you install the software (printer driver) for your printer from the HP Designjet Driver and Documentation CD. For some functions, the HP Designjet System Maintenance utility requires an Internet connection, but you do not need this connection to perform printhead alignment. See "Tell me about HP Designjet System Maintenance" on page 46. To align the printheads: 1. Make sure that you have at least 5 sheets of A4 or Letter paper in the input tray. 2. Start the HP Designjet System Maintenance. 3. Select Maintain printheads, then Align printheads. 4. The printer will print a printhead alignment sheet. Check that the sheet printed has a tick on it. The tick should be cyan. If this is not the case, repeat the process. 31