HP DeskJet Ink Advantage 5000 User Guide - Page 104
Please Connect to HP Instant Ink, Paper Jam in Automatic Document Feeder
View all HP DeskJet Ink Advantage 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Paper too short The paper loaded is shorter than the minimum requirement. Paper that meets the printer requirements must be loaded. For more information, see Paper basics on page 8 and Load media on page 10. Please Connect to HP Instant Ink The printer must be connected to HP Instant Ink, otherwise you will be unable to print soon without further warning. See the printer control panel for instructions on connecting, or visit the HP Instant Ink program website for more information. Paper Jam in Automatic Document Feeder Clear a paper jam in the document feeder. For more information, see Jams and paper-feed issues on page 54. HP Protected Cartridge Installed The ink cartridge listed on the printer control panel can only be used in the printer that initially protected the cartridge using the HP Cartridge Protection feature. The ink cartridge must be replaced in this printer. For information about how to install a new ink cartridge, see Replace the cartridges on page 38. Used HP Instant Ink Cartridge The cartridge is not compatible with your printer. This error can occur if you install an HP Instant Ink cartridge into a printer that has not been enrolled in the HP Instant Ink program. It can also occur if the HP Instant Ink cartridge was previously used in a different printer enrolled in the HP Instant Ink program. Visit the HP Instant Ink program website for more information. Use SETUP cartridges When you first setup the printer, you must install the cartridges that shipped in the box with the printer. These cartridges are labeled SETUP, and they calibrate your printer before the first print job. Failure to install the SETUP cartridges during the initial product setup causes an error. If you installed a set of regular cartridges, remove them and install the SETUP cartridges to complete printer setup. After printer setup is complete, the printer can use regular cartridges. if you still receive error messages and the printer cannot complete ink system initialization, contact HP support. For more information, see HP support on page 75. Do not use SETUP cartridges SETUP cartridges cannot be used after the printer has been initialized. Remove and install non-SETUP cartridges. For more information, see Replace the cartridges on page 38. 98 Appendix B Errors (Windows) ENWW