HP EliteBook 2170p HP EliteBook 2170p Notebook PC Maintenance and Service Guid - Page 58

Fingerprint reader board, Remove the Phillips PM2.0×2.0 screw

Get HP EliteBook 2170p PDF manuals and user guides View all HP EliteBook 2170p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Reverse this procedure to reassemble and install the hard drive. Fingerprint reader board Description Fingerprint reader board (includes bracket and cable) Spare part number 693349-001 Before removing the fingerprint reader board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the service cover (see Service cover on page 47). 6. Remove the hard drive (see Hard drive on page 48). Remove the fingerprint reader board: 1. Release the zero insertion force (ZIF) connector to which the fingerprint reader board cable is attached, and then disconnect the fingerprint reader board cable (1) from the SD Card reader board. 2. Remove the Phillips PM2.0×2.0 screw (2) that secures the fingerprint reader board bracket to the top cover. 50 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Reverse this procedure to reassemble and install the hard drive.
Fingerprint reader board
Description
Spare part number
Fingerprint reader board (includes bracket and cable)
693349-001
Before removing the fingerprint reader board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
45
).
5.
Remove the service cover (see
Service cover
on page
47
).
6.
Remove the hard drive (see
Hard drive
on page
48
).
Remove the fingerprint reader board:
1.
Release the zero insertion force (ZIF) connector to which the fingerprint reader board cable is
attached, and then disconnect the fingerprint reader board cable
(1)
from the SD Card
reader board.
2.
Remove the Phillips PM2.0×2.0 screw
(2)
that secures the fingerprint reader board bracket to the
top cover.
50
Chapter 4
Removal and replacement procedures