HP EliteBook 2170p HP EliteBook 2170p Notebook PC Maintenance and Service Guid - Page 65

Fan, from the system board.

Get HP EliteBook 2170p PDF manuals and user guides View all HP EliteBook 2170p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

Fan Description Fan (includes cable) Spare part number 693308-001 Before removing the fan, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the service cover (see Service cover on page 47). Remove the fan: 1. Disconnect the fan cable (1) from the system board. 2. Remove the two Phillips PM2.0×3.4 screws (2) that secure the fan to the top cover. 3. Lift the left side of the fan (3) until it rests at an angle, and then remove the fan. Reverse this procedure to install the fan. Component replacement procedures 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Fan
Description
Spare part number
Fan (includes cable)
693308-001
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
45
).
5.
Remove the service cover (see
Service cover
on page
47
).
Remove the fan:
1.
Disconnect the fan cable
(1)
from the system board.
2.
Remove the two Phillips PM2.0×3.4 screws
(2)
that secure the fan to the top cover.
3.
Lift the left side of the fan
(3)
until it rests at an angle, and then remove the fan.
Reverse this procedure to install the fan.
Component replacement procedures
57