HP EliteBook 2170p HP EliteBook 2170p Notebook PC Maintenance and Service Guid - Page 79
Media Card reader assembly, Disconnect all external devices from the computer.
View all HP EliteBook 2170p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
3. Remove the power switch board (2). Reverse this procedure to install the power switch board. Media Card reader assembly NOTE: The Media Card reader assembly spare part kit does not include a Media Card reader assembly cable. The Media Card reader assembly cable is included in the Cable Kit, spare part number 693306-001. Description Media Card reader assembly Spare part number 693353-001 Before removing the Media Card reader assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 45), and then remove the following components: a. Service cover (see Service cover on page 47) b. Hard drive (see Hard drive on page 48) c. WLAN module (see WLAN module on page 51) d. WWAN module (see WWAN module on page 53) Component replacement procedures 71