HP Engage Go 13.5 Maintenance and Service Guide - Page 15
Locating the I/O connectivity base power button, Adjusting the mobile head unit
View all HP Engage Go 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Locating the I/O connectivity base power button The power button is located on the underside of the I/O connectivity base. The head unit controls the I/O connectivity base. When the head unit is turned off, the I/O connectivity base is turned off, and power is not available from the I/O connectivity base ports. The exception is the I/O connectivity base USB port that connects to the head unit. That port remains powered so that it can continue to communicate with the head unit and allow the I/O connectivity base to turn back on when the head unit is turned on. After the system is turned off, you can press the power button on the underside of the I/O connectivity base to allow power to be available on the I/O connectivity base ports while the head unit remains turned off. Adjusting the mobile head unit You can tilt the mobile head unit by as much as 10° when you set the angle between 50° and 60°. You can swivel the mobile head unit 180° in either direction. 8 Chapter 1 Computer features