HP Engage Go 13.5 Maintenance and Service Guide - Page 58
Remove the Phillips screw that secures the connector, Peel the cable off the computer
View all HP Engage Go 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
1. Remove the captive barcode scanner sides covers (1), and then loosen the two captive Phillips screws from under the covers (2). 2. Use a tool to lift and release the edges of the bump cover, and the lift the cover straight up to remove it. 3. Remove the Phillips screw that secures the connector (1). 4. Peel the cable off the computer (2). Bump cover and pogo connector 51
1.
Remove the captive barcode scanner sides covers
(1)
, and then loosen the two captive Phillips
screws from under the covers
(2)
.
2.
Use a tool to lift and release the edges of the bump cover, and the lift the cover straight up to
remove it.
3.
Remove the Phillips screw that secures the connector
(1)
.
4.
Peel the cable off the computer
(2)
.
Bump cover and pogo connector
51