HP Engage Go 13.5 Maintenance and Service Guide - Page 48

Cameras

Get HP Engage Go 13.5 PDF manuals and user guides View all HP Engage Go 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

2. Use tweezers to lift the sensor out of the computer (2). The sensor is secured with adhesive. To install the ambient light sensor, reverse the removal procedure. Cameras To remove the cameras, use this procedure and illustration. Before removing the cameras, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 31). 2. Remove the display assembly (see Display assembly on page 31). 3. Disconnect the battery cable from the system board (see Battery on page 32). Remove the cameras: 1. Use tweezers to disconnect the camera cables from the reverse ZIF connectors on the system board (1). Cameras 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
2.
Use tweezers to lift the sensor out of the computer
(2)
. The sensor is secured with adhesive.
To install the ambient light sensor, reverse the removal procedure.
Cameras
To remove the cameras, use this procedure and illustration.
Before removing the cameras, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
31
).
2.
Remove the display assembly (see
Display assembly
on page
31
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
32
).
Remove the cameras:
1.
Use tweezers to disconnect the camera cables from the reverse ZIF connectors on the system
board
(1)
.
Cameras
41