HP Engage Go 13.5 Maintenance and Service Guide - Page 46
Remove the Phillips M2.0 × 2.0 screw
View all HP Engage Go 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
2. Remove the Phillips M2.0 × 2.0 screw (2) that secures the WWAN module to the bottom cover. (The WWAN module tilts up.) 3. Remove the WWAN module (3) by pulling the module away from the slot at an angle. NOTE: Models have either one or two WLAN antennas. On models with two antennas, the #1 white WLAN antenna cable connects to the WLAN module #1 Main terminal. The #2 black WLAN antenna cable connects to the WLAN module #1 Aux terminal. WWAN module 39
2.
Remove the Phillips M2.0 × 2.0 screw
(2)
that secures the WWAN module to the bottom cover. (The
WWAN module tilts up.)
3.
Remove the WWAN module
(3)
by pulling the module away from the slot at an angle.
NOTE:
Models have either one or two WLAN antennas. On models with two antennas, the #1 white
WLAN antenna cable connects to the WLAN module #1 Main terminal. The #2 black WLAN antenna
cable connects to the WLAN module #1 Aux terminal.
WWAN module
39