HP Model 735 hp workstation 9000 series model 735 - service handboook - Page 54
Stable, Storage
View all HP Model 735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
. Return to previous menu using the EXIT command. q Set or display the Fastsize value (amount of memory initialized during boot) using the FASTSIZE command. . Display a menu of commands using the HELP command or a description of any command as an option to the HELP command. . Display the model number. version numbers, and jumper settings on the System card using the INFO command. . Display the current LAN STATION ADDRESS value in stable storage using the LAN_ADDR command. Must use SS_CONFIG to set this value. . Display the current FDDI STATION ADDRESS value in stable storage using the FDDI_ADDR command. Must use SS_CONFIG to set this value. q Select an operating system for the next boot attempt using the OS command. . Set or display the current values for the console, keyboard, primary, or alternate boot paths using the PATH command. e Display the most recent HPMC~or TOC error information logged into Stable Storage using the PIM INFO command. . Reset the System Unit using the RESET command. . Search for possible boot devices using the SEARCH command. . Display/Set secure boot mode or the ability to interact with the console device within the first 10 seconds before boot device selection is disabled using the SECURE command. . Display the results of the previous search command using the SHOW command. Syntaxchecking is performed for any supported commands. Error status is displayed on the console along with any relevant information. Stable Storage Stable Storage is non-volatile memory associated with each PA- RISC processor module. Stable storage is used by the processor (CPU) to store device path information, the state of the boot flags, HPMC error reformation, and operating system initialization data. 4-14 Troubleshooting