HP Model 735 hp workstation 9000 series model 735 - service handboook - Page 61
Field Replaceable, Units
View all HP Model 735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
,. Field Replaceable Units 5 This chapter provides a list of the Field replaceable units (FRUS) and illustrations for the FRU removal and replacement. The tools required for FRU removal and replacement areas follows: #1 Phillips screwdriver with 100-mm (4-in.) blade Light-duty, flat -tipped screwdriverwith 150-mm (6-in.) blade Needlenose pliers WARNING: For each of the removal procedures in this chapter. you must shut down the operating system, power off the system. and unplug the power cord from the wall. NOTICE: To maintain FCC/EMI compliance, verify that all covers are replaced and that all screws are properly seated. Field Replaceable Units 5-1
,.
Field Replaceable
Units
5
This chapter provides a list of the Field replaceable units (FRUS) and illustrations
for the FRU removal and replacement.
The tools required for FRU removal and replacement areas follows:
#1 Phillips screwdriver with 100–mm
(4–in.)
blade
Light–duty,
flat
–tipped screwdriver
with 150–mm
(6–in.)
blade
Needlenose pliers
WARNING:
For each of the removal procedures in this
chapter. you must shut down the operating
system, power off the system. and unplug the
power cord from the wall.
NOTICE:
To maintain FCC/EMI compliance, verify
that all covers are replaced and that all
screws are properly seated.
Field Replaceable Units
5-1