HP Officejet Pro 8000 User Guide - Page 111

Prepare the device for shipment, Remove the ink cartridges and printheads before shipment

Page 111 highlights

Prepare the device for shipment If after contacting HP Customer Support or returning to the point of purchase, you are requested to send the device in for service, make sure you remove and keep the following items before returning your device: • The ink cartridges and printheads • The power cord, USB cable, and any other cable connected to the device • Any paper loaded in the input tray • Remove any originals you might have loaded in the device This section contains the following topics: • Remove the ink cartridges and printheads before shipment Remove the ink cartridges and printheads before shipment Before you return the device, make sure you remove your ink cartridges and printheads. NOTE: This information does not apply to customers in Japan. To remove ink cartridges before shipment 1. Turn the device and wait until the print carriage is idle and silent. If the device will not turn on, skip this step and go to step 2. 2. Gently pull open the ink cartridge cover. 3. Remove the ink cartridges from their slots by grasping each between your thumb and forefinger and pulling it firmly toward you. 4. Place the ink cartridges in an airtight plastic container so they will not dry out, and put them aside. Do not send them with the device unless the HP customer support call agent instructs you to do so. For more information on storing supplies, see Store printing supplies. 5. Close the ink cartridge door and wait a few minutes for the print carriage to move back to its home position (on the right side). 6. Press the Power button to turn off the device. Prepare the device for shipment 107

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140

Prepare the device for shipment
If after contacting HP Customer Support or returning to the point of purchase, you are requested
to send the device in for service, make sure you remove and keep the following items before
returning your device:
The ink cartridges and printheads
The power cord, USB cable, and any other cable connected to the device
Any paper loaded in the input tray
Remove any originals you might have loaded in the device
This section contains the following topics:
Remove
the
ink
cartridges
and
printheads
before
shipment
Remove the ink cartridges and printheads before shipment
Before you return the device, make sure you remove your ink cartridges and printheads.
NOTE:
This information does not apply to customers in Japan.
To remove ink cartridges before shipment
1.
Turn the device and wait until the print carriage is idle and silent. If the device will not turn on,
skip this step and go to step 2.
2.
Gently pull open the ink cartridge cover.
3.
Remove the ink cartridges from their slots by grasping each between your thumb and
forefinger and pulling it firmly toward you.
4.
Place the ink cartridges in an airtight plastic container so they will not dry out, and put them
aside. Do not send them with the device unless the HP customer support call agent instructs
you to do so. For more information on storing supplies, see
Store
printing
supplies
.
5.
Close the ink cartridge door and wait a few minutes for the print carriage to move back to its
home position (on the right side).
6.
Press the
Power
button to turn off the device.
Prepare the device for shipment
107