HP Pavilion m7-1000 HP Pavilion dv7 Entertainment PC - Maintenance and Service - Page 75

TouchPad button board, Remove the Phillips PM2.5×3.0 screw

Get HP Pavilion m7-1000 PDF manuals and user guides View all HP Pavilion m7-1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

Remove the fingerprint reader board: 1. Turn the top cover upside down, with the front toward you. 2. Detach the fingerprint reader board cable from the top cover. (The fingerprint reader board cable is attached to the top cover with double-sided tape.) 3. Remove the Phillips PM2.5×3.0 screw (2) that secures the fingerprint reader board bracket to the top cover. 4. Slide the fingerprint reader board bracket (3) up and away from the top cover. 5. Remove the fingerprint reader board (4) and cable. Reverse this procedure to install the fingerprint reader board. TouchPad button board Description TouchPad button board (includes cable and bracket) Spare part number 681987-001 Before removing the TouchPad button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 45), and then remove the following components: a. Hard drive (see Hard drive on page 46) b. Optical drive (see Optical drive on page 51) Component replacement procedures 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
Remove the fingerprint reader board:
1.
Turn the top cover upside down, with the front toward you.
2.
Detach the fingerprint reader board cable from the top cover. (The fingerprint reader board cable
is attached to the top cover with double-sided tape.)
3.
Remove the Phillips PM2.5×3.0 screw
(2)
that secures the fingerprint reader board bracket to
the top cover.
4.
Slide the fingerprint reader board bracket
(3)
up and away from the top cover.
5.
Remove the fingerprint reader board
(4)
and cable.
Reverse this procedure to install the fingerprint reader board.
TouchPad button board
Description
Spare part number
TouchPad button board (includes cable and bracket)
681987-001
Before removing the TouchPad button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
45
), and then remove the following components:
a.
Hard drive (see
Hard drive
on page
46
)
b.
Optical drive (see
Optical drive
on page
51
)
Component replacement procedures
67