HP Pavilion m7-1000 HP Pavilion dv7 Entertainment PC - Maintenance and Service - Page 76
Release the two pieces of grounding tape, that attach the TouchPad button board
View all HP Pavilion m7-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
c. Keyboard (see Keyboard on page 57) d. Top cover (see Top cover on page 61) Remove the TouchPad button board: 1. Turn the top cover upside down, with the front toward you. 2. Release the TouchPad button board ZIF connector (1) to which the TouchPad button board cable is connected, and then disconnect the cable (2) from the TouchPad button board. 3. Release the TouchPad board ZIF connector (3) to which the TouchPad button board cable is connected, and then disconnect the cable (4) from the TouchPad board. 4. Release the two pieces of grounding tape (5) that attach the TouchPad button board to the TouchPad. 5. Remove the TouchPad button board cable (6). 6. Remove the two Phillips PM2.5×4.0 screws (1) that secure the TouchPad button board bracket to the top cover. 7. Lift the rear edge of the TouchPad button board bracket (2) until it rests at an angle. 68 Chapter 4 Removal and replacement procedures