HP Pavilion m7-1000 HP Pavilion dv7 Entertainment PC - Maintenance and Service - Page 77
Solid-state drive
View all HP Pavilion m7-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
8. Slide the TouchPad button board bracket (3) up and away from the top cover until the tabs (4) on the front edge of the bracket disengage from the slots (5) on the top cover. Reverse this procedure to install the TouchPad button board. Solid-state drive Description Spare part number 160-GB solid-state drive for use on all computer models 681997-001 32-GB mSATA solid-state drive for use only on computer models equipped with an Intel processor 682099-001 Before removing the solid-state drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 45), and then remove the following components: a. Hard drive (see Hard drive on page 46) b. Optical drive (see Optical drive on page 51) c. Keyboard (see Keyboard on page 57) d. Top cover (see Top cover on page 61) Component replacement procedures 69