HP Pavilion m7-1000 HP Pavilion dv7 Entertainment PC - Maintenance and Service - Page 93
Remove the two Phillips PM2.5×10.0 screws
View all HP Pavilion m7-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
d. Top cover (see Top cover on page 61) e. System board (see System board on page 73) Remove the subwoofer: 1. Release the subwoofer cables (1) from the clips (2) and routing channel built into the base enclosure. 2. Remove the two Phillips PM2.5×10.0 screws (1) that secure the subwoofer to the base enclosure. 3. Remove the subwoofer (2). NOTE: The subwoofer includes four rubber isolators (3). These isolators are crucial to the performance of the subwoofer. Component replacement procedures 85
d.
Top cover (see
Top cover
on page
61
)
e.
System board (see
System board
on page
73
)
Remove the subwoofer:
1.
Release the subwoofer cables
(1)
from the clips
(2)
and routing channel built into
the base enclosure.
2.
Remove the two Phillips PM2.5×10.0 screws
(1)
that secure the subwoofer to the base enclosure.
3.
Remove the subwoofer
(2)
.
NOTE:
The subwoofer includes four rubber isolators
(3)
. These isolators are crucial to
the performance of the subwoofer.
Component replacement procedures
85