HP Photosmart C6100 Basics Guide - Page 73
Align the printer, Clean the HP All-in-One, Setup, Tools, Contact HP - ink system failure
View all HP Photosmart C6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Chapter 4 7. Repeat steps 2 through 5 for each ink cartridge you are replacing. 8. Close the ink cartridge door. Align the printer The printer automatically aligns when ink cartridges are replaced. You might want to use this feature when the self-test report shows streaking or white lines through any of the blocks of color. If you still have print quality problems after aligning the printer, try cleaning the print head. If print quality problems persist after aligning and cleaning, contact HP customer support. To align the printer from the control panel 1. Load letter, A4, or legal unused plain white paper into the input tray. 2. Press Setup. The Setup menu appears. 3. Press to highlight Tools, and press OK. The Tools menu appears. 4. Press to highlight Align Printer, and press OK. 5. The HP All-in-One prints a test page, aligns the print head, and calibrates the printer. Recycle or discard the page. A success or failure message appears. Note If you have colored paper loaded in the input tray when you align the printer, the alignment will fail. Load unused plain white paper into the input tray, and then try the alignment again. If the alignment fails again, you might have a defective sensor or ink cartridge. Contact HP Support. Go to www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. 6. Press OK to continue. 7. Recycle or discard the page. Clean the HP All-in-One To ensure that your copies and scans remain clear, you might need to clean the glass and lid backing. You might also want to dust the exterior of the HP All-in-One. ● Clean the glass ● Clean the lid backing ● Clean the exterior 70 HP Photosmart C6100 All-in-One series Use the HP All-in-One features