HP ProSignia 320 Desktop PC 6433C Compaq Deskpro Family of Personal Computers, - Page 71

Red Power LED Blinks Every, Run Computer Setup F10 Setup.

Get HP ProSignia 320 Desktop PC 6433C PDF manuals and user guides View all HP ProSignia 320 Desktop PC 6433C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

POST Error Messages Continued Screen Message Green Power LED Blinks Once per Second Beeps* None Probable Cause Computer in normal Suspend mode. Recommended Action None Green Power LED ON None Computer on. None Invalid Electronic Serial Number None Electronic serial number has become corrupted. Run Computer Setup (F10 Setup). If Setup already has data in the field or will not allow the serial number to be entered, download and run SP5572.EXE (SNZERO.EXE). Flashing Power and Hard Drive Green LEDs None Unseated riser board. 1. Remove riser board. 2. Wipe connector. 3. Reinstall riser board. Red Power LED Blinks Every None 2 or more Seconds Power supply overloaded. 1. Push in power button. LED should be green. 2. Remove all AC power from computer, wait 30 seconds, then apply power. 3. Remove load from power supply by removing options one at a time until computer runs. 4. Check for damage to system board. 5. Replace system board. 6. Replace power supply. Red Power LED Blinks Every Second None System memory error. 1. Check memory module. 2. Remove and reseat memory module. 3. See the "Solving Memory Problems" section of this guide. Red power LED ON None Processor unseated. Reseat processor in system board. XXOOOYZZ Parity Check None * L = Long, S = Short Parity RAM failure. Run Computer Setup and Diagnostic Utilities. B-10 POST Error Messages - Numbered

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
B-10
POST Error Messages - Numbered
POST Error Messages
Continued
Screen Message
Beeps*
Probable Cause
Recommended Action
Green Power LED Blinks
Once per Second
None
Computer in normal
Suspend mode.
None
Green Power LED ON
None
Computer on.
None
Invalid Electronic Serial
Number
None
Electronic serial number
has become corrupted.
Run Computer Setup (F10 Setup).
If Setup already has data in the field
or will not allow the serial number to
be entered, download and run
SP5572.EXE (SNZERO.EXE).
Flashing Power and Hard
Drive Green LEDs
None
Unseated riser board.
1.
Remove riser board.
2.
Wipe connector.
3.
Reinstall riser board.
Red Power LED Blinks Every
2 or more Seconds
None
Power supply overloaded.
1.
Push in power button. LED
should be green.
2.
Remove all AC power from
computer, wait 30 seconds,
then apply power.
3.
Remove load from power
supply by removing options
one at a time until computer
runs.
4.
Check for damage to system
board.
5.
Replace system board.
6.
Replace power supply.
Red Power LED Blinks
Every Second
None
System memory error.
1.
Check memory module.
2.
Remove and reseat memory
module.
3.
See the "Solving Memory
Problems" section of this
guide.
Red power LED ON
None
Processor unseated.
Reseat processor in system board.
XXOOOYZZ Parity Check
None
Parity RAM failure.
Run Computer Setup and
Diagnostic Utilities.
* L = Long, S = Short