HP RP3 Maintenance & Service Guide HP RP3 Retail System Model 3100 - Page 27
Memory, DDR3-SDRAM DIMMs
View all HP RP3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Memory Description 8-GB, PC3-12800 4-GB, PC3-12800 2-GB, PC3-12800 Spare part number 689374-001 689373-001 689372-001 The computer comes with one double data rate 3 synchronous dynamic random access memory (DDR3-SDRAM) small outline dual inline memory module (SODIMM). DDR3-SDRAM DIMMs CAUTION: This product DOES NOT support DDR3 Ultra Low Voltage (DDR3U) memory. The processor is not compatible with DDR3U memory and if you plug DDR3U memory into the system board, it can cause the physical damage to the SODIMM or invoke system malfunction. For proper system operation, the SODIMM must be: ● industry-standard 204-pin ● unbuffered non-ECC PC3-12800 DDR3-1600 MHz-compliant ● 1.5 volt DDR3-SDRAM SODIMMs The DDR3-SDRAM SODIMM must also: ● support CAS latency 11 DDR3 1600 MHz (11-11-11 timing) ● contain the mandatory Joint Electronic Device Engineering Council (JEDEC) specification In addition, the computer supports: ● 512-Mbit, 1-Gbit, and 2-Gbit non-ECC memory technologies ● single-sided and double-sided SODIMMS ● SODIMMs constructed with x8 and x16 devices; SODIMMs constructed with x4 SDRAM are not supported NOTE: The system will not operate properly if you install an unsupported SODIMM. 20 Chapter 4 Removal and Replacement Procedures