HP RP3 Maintenance & Service Guide HP RP3 Retail System Model 3100 - Page 40
To install a hard drive, reverse the removal procedures.
View all HP RP3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
5. Press the retention arm on the rear of the carrier outward (1), then slide the drive forward and lift it out of the carrier (2). 6. Remove the four mounting screws from the sides of the hard drive. NOTE: Install the mounting screws on the sides of the new hard drive. To install a hard drive, reverse the removal procedures. NOTE: No configuration of the SATA hard drive is necessary; the computer automatically recognizes it the next time you turn on the computer. Hard Drive 33
5.
Press the retention arm on the rear of the carrier outward
(1)
, then slide the drive forward and lift
it out of the carrier
(2)
.
6.
Remove the four mounting screws from the sides of the hard drive.
NOTE:
Install the mounting screws on the sides of the new hard drive.
To install a hard drive, reverse the removal procedures.
NOTE:
No configuration of the SATA hard drive is necessary; the computer automatically
recognizes it the next time you turn on the computer.
Hard Drive
33