HP RP3 Maintenance & Service Guide HP RP3 Retail System Model 3100 - Page 49
Power Supply
View all HP RP3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
6. Disconnect the speaker wire from the system board connector labeled SPKR (2), and then remove the speaker from the chassis (3). To install the speaker, reverse the removal procedures. Power Supply Description Power supply, 115W Spare part number 682435-001 WARNING! Voltage is always present on the system board when the computer is plugged into an active AC outlet. To avoid possible personal injury and damage to the equipment the power cord should be disconnected from the computer and/or the AC outlet before opening the computer. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 15). 2. Remove the access panel Access Panel on page 16). 3. Rotate the optical drive cage to its upright position. 4. Disconnect the power cables from all of the drives. 5. Rotate the power supply to its upright position. 6. Disconnect the power cables from the following white system board connectors: ● PWRCMD ● PWR 42 Chapter 4 Removal and Replacement Procedures