HP q1335a User Manual - Page 156
Restoring the factory default settings
View all HP q1335a manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Restoring the factory default settings Once you configure the HP print server, the configuration settings are retained in memory unless you manually reset them to factory defaults using the following procedure. 1 Make sure the printer is turned on. 2 Unplug the print server from the printer. 3 While holding down the Test button on the print server, plug the print server back into the printer. Continue to hold down the Test button for approximately 3 seconds. 148 G Working with the print server ENWW
148
G
Working with the print server
ENWW
Restoring the factory default settings
Once you configure the HP print server, the configuration settings are retained in memory unless
you manually reset them to factory defaults using the following procedure.
1
Make sure the printer is turned on.
2
Unplug the print server from the printer.
3
While holding down the Test button on the print server, plug the print server back into the
printer. Continue to hold down the Test button for approximately 3 seconds.