Honeywell MS9535-5 User Manual - Page 27
Visual, Scanner Operation
View all Honeywell MS9535-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
SCANNER OPERATION Indicators Visual The MS9535 has three LED indicators (blue, white and amber) located on the head of the scanner. When the scanner is in operation, the flashing or stationary activity of the LEDs indicates the status of the scanner and the current scan. Blue, White & Amber LEDs are off The scanner is not receiving power from the cradle or the scanner's internal battery. The scanner is in full sleep mode. Press the CodeGate button to wake the scanner from full sleep mode. The blue LED will start to flash as the unit exits full sleep mode. Steady Amber After establishing communication, when the scanner is put into the cradle and the battery has been fully charged, the amber LED will remain steady. If the communication is not established, when the scanner is put into the cradle, the amber LED will stay on after a short delay. Steady Blue When the laser is active, the blue LED is illuminated. The blue LED will remain illuminated until the laser is deactivated. Steady Blue and Single White Flash When the scanner successfully reads a bar code, the white LED will flash, the blue LED remains steady and the scanner will beep once. If the scanner reads the bar code successfully at a relatively long distance but still within the 10-meter operation range, the white LED may flash after a short delay. Steady Blue and Steady White After a successful scan, the scanner transmits the data to the cradle. If the cradle is not ready to accept the information, the scanner's white LED will remain on until the data can be transmitted or until a communication time-out occurs. 23