Honeywell MS9535-5 User Manual - Page 28
Visual, Alternating Flashing of Blue and White, Steady White, Blue off, Flashing Blue, Flashing - configuration
View all Honeywell MS9535-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
SCANNER OPERATION Indicators Visual Alternating Flashing of Blue and White This indicates the scanner is in configuration mode. Two razzberry tones indicate that an invalid bar code has been scanned while in this mode. If the scanner is in RangeGate active mode, this indicates the SRAM of the scanner becomes full. If the scanner needs to have a Flash ROM upgrade, the alternating flashing of the blue and white LEDs will occur during startup and is accompanied by three beeps. Steady White, Blue off This indicates the laser is off and the scanner is still waiting for communication from the cradle. Flashing Blue The blue LED on the scanner and the cradle indicates the "connecting" status of the cradle with the scanner. When the Bluetooth connection breaks, the blue LED will flash. This indicates the scanner is trying to establish communication with the cradle. A single blue flash on the cradle indicates data has been received from the scanner. Flashing Amber When scanner is in the cradle, a flashing amber LED indicates the scanner is being charged. When the scanner is out of cradle, a flashing amber LED indicates the scanner has low battery power and needs recharging. 24