Huawei U120 User Manual - Page 14
Loading/Removing the SIM Card
View all Huawei U120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Loading/Removing the SIM Card 2 Plug in the connector of the charger to a power socket. Note • When the battery power level is very low, the phone makes alert sounds and displays a prompt. When the battery power level is too low, the phone will power off automatically • When the battery is being charged, the charging indicator blinks continuously. When the charging indicator stops blinking, it indicates that the battery is full. Loading/Removing the SIM Card Your SIM card contains such information as phone numbers and contacts. Load your SIM card before using your phone. To use the SIM card properly, please read the following instructions carefully. Note • Keep the SIM card out of the reach of children. • The SIM card and its metal contacts are easily damaged by scratching or bending. So be careful when you carry, load or remove it. • Always disconnect the charger from the phone before loading or removing the SIM card. To load or remove the SIM card, do as follows: 1 Power off the phone and remove the battery. 2 Position the card at the card slot entrance, making sure it is facing the same way as shown in the diagram below, with the notched corner at the bottom right. Then slide in as shown. 3 To remove the SIM card, power off your phone and take out the battery. Then press the SIM card with one finger and slide it out of the slot. 8