Intel SBXD62 User Guide - Page 23
Table 2. System Board LEDs, Table 3. Light Path Diagnostics Panel LEDs
UPC - 735858185448
View all Intel SBXD62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Table 2. System Board LEDs LED name and location DIMM 1 error LED (CR201) DIMM 2 error LED (CR4) DIMM 3 error LED (CR5) DIMM 4 error LED (CR6) BMC fault LED (CR11) Microprocessor 1 error LED (CR12) Microprocessor 2 error LED (CR13) System board fault LED (CR30) Description There is a problem with the corresponding DIMM. There is a problem with the BMC. There is a problem with the corresponding microprocessor. There is a problem with the system board. The following illustration shows the light path diagnostics panel on the system board. NMI MIS SBRD TEMP NMI error LED Microprocessor speed mismatch error LED System-board error LED Over temperature error LED Light path diagnostics LED (CD111) Light path diagnostics switch (SW4) Table 3. Light Path Diagnostics Panel LEDs LED error NMI MIS (microprocessor speed mismatch) S BRD (system board) TEMP (over temperature) Light path diagnostics LED (CR111) Action Check error log for additional information. Restart the blade server. If the error still exists, call for service. Check microprocessors to make sure that they are the same speed. Restart the blade server. If the error still exists, call for service. Check the Intel® Blade Server Chassis SBCE blowers for correct operation and the air inlets for obstructions. Make sure that the temperature of the room where the blade server is installed is within the limits specified by the "Intel® Server Compute Blade SBXD62 Specifications" on page 3. Lights to show that the light path diagnostics circuit is active and functioning. Check the other light path diagnostic LEDs for errors. Intel® Server Compute Blade SBXD62 Installation and User's Guide 13