Intel SBXD62 User Guide - Page 63

LED DIMM x error Problem A memory error has occurred. Processor x error The microprocessor has failed. Temperature error (TEMP) The system temperature has exceeded a threshold level. System board error (S BRD) The system board has failed NMI error The system board has failed. Processor The processors do not match. mismatch (MIS) Action Replace the failing DIMM, which is indicated by the lit DIMM failure LED. NOTE: Multiple DIMM LEDs do not necessarily indicate multiple DIMM failures. If more than one DIMM LED is lit, reseat or replace one DIMM at a time until the error is corrected. Check the system error log in the management module for information about the error. If the problem remains, have the blade server serviced. Make sure that the microprocessor that is indicated by the lit LED is installed correctly (see "Installing Microprocessors" on page 23 for installation instructions). If the problem remains, replace the microprocessor. • Determine whether a blower on the Intel® Blade Server Chassis SBCE has failed. If it has, replace the blower. • Make sure that the room temperature is not too high (see "Intel® Server Compute Blade SBXD62 Specifications" on page 3 for temperature information). If the problem remains, have the blade server serviced. Replace the blade server cover, reinsert the blade server in the Intel® Blade Server Chassis SBCE, and then restart the server. If the problem remains, have the blade server serviced. • Replace the blade server cover, reinsert the blade server in the Intel® Blade Server Chassis SBCE, and then restart the server. • Check the system error log in the management module for information about the error. If the problem remains, have the blade server serviced. Make sure that microprocessors 1 and 2 have the same cache size and type and the same clock speed. Internal and external clock frequencies must be identical. If the problem remains, have the blade server serviced. Intel® Server Compute Blade SBXD62 Installation and User's Guide 53