Kodak Pro 14n User Guide - Page 153
Using the Built-in Speedlight, Aperture-Priority Auto. Standard TTL Flash for Digital SLR is
UPC - 041771334376
View all Kodak Pro 14n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Using the Built-in Speedlight Flash Photography Follow these instructions when using a G-type or D-type AF NIKKOR lens. NOTE: Continuous Shooting Drive mode cannot be used in flash photography. 1. Set the Metering system to Matrix or Center-Weighted metering. 2. Press the Flash Lock-Release button to release the Built-In Speedlight. The Speedlight starts to charge when it is released. appears in the viewfinder when it is fully charged. NOTE: To conserve power when the Speedlight is not in use, close it by pressing the Speedlight down gently until it clicks in place. 3. Press and hold and rotate the Main-Command dial to set the Flash Sync mode. 4. Set the Exposure mode and confirm shutter speed and aperture. NOTE: Automatic Balanced Fill-Flash for Digital SLR is executed when you set Exposure mode to Programmed Auto, Shutter-Priority Auto, or Aperture-Priority Auto. Standard TTL Flash for Digital SLR is executed when you set Exposure mode to Manual. April 29, 2004 10-3