Kodak Pro 14n User Guide - Page 45
Inserting/Removing Batteries, Charging LED - charger
UPC - 041771334376
View all Kodak Pro 14n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Powering Your Camera Charging LED Inserting/Removing Batteries 3. Insert a battery in the battery slot on the charger/adapter. The appearance of the Charging LED varies, depending on the status of the charging operation: Color Action Charging Status green one blink 0 - 50% complete green two blinks 50 - 70% complete green three blinks 70%+ complete green constant Charge complete red blinks about once / sec. Charge pending red blinks rapidly Error condition 4. Remove the battery when the charge is complete (the green light stays on constantly). 5. Let the battery cool down for 15 to 30 minutes. Put the battery in the charger again until the green light indicates that charging is complete. NOTE: For optimum battery performance, periodically discharge the battery before charging. • To insert, slide a charged battery in the battery slot on the camera and turn the latch clockwise. latch April 29, 2004 • To remove, lift the latch, turn the latch counterclockwise and slide the battery out. 3-3