Kodak Pro 14n User Guide - Page 16
Warnings, Safety Warnings, Operational Warnings - professional dcs digital camera
UPC - 041771334376
View all Kodak Pro 14n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Important Information Warnings Safety Warnings Operational Warnings • To prevent fire or shock hazard, use only the recommended accessories and attachments. • Do not use IEEE 1394 repeaters when connecting your camera. Doing so can damage the camera. • Be sure the connector orientation is correct when you connect the IEEE 1394 cable to the computer. Connecting incorrectly can damage your camera or computer. At the computer connection, the point on the 6-pin plug must align with the point on the computer port. • Use extreme care when handling memory cards as they are easily damaged. If dropped, the card may be damaged, resulting in the loss of all data on the card. • Do not remove a memory card, the KODAK PROFESSIONAL DCS Pro Battery, or the KODAK PROFESSIONAL DCS Pro DC Power Module from the camera while the memory card icon on the Digital Status LCD or the Card Busy LED inside the Media door are blinking. The blinking indicates that data is being read from or written to the card. You may lose data if you remove a card at this time. • Operate your camera only from the type of power source indicated on the name plate of the KODAK PROFESSIONAL DCS Pro DC Power Module. A line voltage outside this range can destroy the power module and/or the camera. • Use only the KODAK PROFESSIONAL DCS Pro DC Power Module included with your camera or available from Kodak as an accessory. Do not plug other adapters into the camera. • The KODAK PROFESSIONAL DCS Pro DC Power Module is for indoor use only. • Do not use the supplied KODAK PROFESSIONAL DCS Pro DC Power Module for any purpose other than for the KODAK PROFESSIONAL DCS Pro 14n Digital Camera. • Use the Image LCD to verify that a picture was captured correctly during your photo session. 1-2 April 29, 2004