Kodak Pro 14n User Guide - Page 210

Troubleshooting, Release the shutter as it takes

Page 210 highlights

Troubleshooting Top Status LCD Viewfinder Cause Remedy Lo appears Lo appears Underexposure warning (subject is In P mode, use flash. too dark). In S mode, select a slower shutter speed. In A mode, select a larger aperture (smaller f-number). (If the warning indications remain after trying the remedy in S or A mode, use flash.) - Electronic analog Subject brightness is beyond When the subject is bright, use an exposure display camera's exposure range. ND filter. When the subject is dark, blinks use flash. The electronic analog exposure display blinks when the Speedlight is used. buLb blinks buLb blinks Shutter speed is set to buLb in S mode. Cancel the buLb by selecting 30 seconds or faster shutter speed, or select M mode to perform Long Time exposure. Shutter speed indication blinks 125 appears Shutter speed faster than sync speed is selected in S or M mode. Release the shutter as it takes a flash picture. Shutter speed automatically shifts to 1/125 second. - blinks for 3 Flash has fired at full output and Capture the image again after seconds after flash underexposure may have occurred. confirming focus distance, aperture, or flash shooting distance range. Err blinks Err blinks Malfunction detected. Release the shutter again. If the warning indication remains, or this warning appears frequently, contact your camera dealer. C-2 April 29, 2004

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230

C-2
April 29, 2004
Troubleshooting
Lo appears
Lo appears
Underexposure warning (subject is
too dark).
In P mode, use flash.
In S mode, select a slower shutter
speed.
In A mode, select a larger aperture
(smaller f-number).
(If the warning indications remain
after trying the remedy in S or A
mode, use flash.)
Electronic analog
exposure display
blinks
Subject brightness is beyond
camera’s exposure range.
When the subject is bright, use an
ND filter. When the subject is dark,
use flash. The electronic analog
exposure display blinks when the
Speedlight is used.
buLb blinks
buLb blinks
Shutter speed is set to buLb in S
mode.
Cancel the buLb by selecting 30
seconds or faster shutter speed, or
select M mode to perform Long
Time exposure.
Shutter speed
indication blinks
125 appears
Shutter speed faster than sync
speed is selected in S or M mode.
Release the shutter as it takes a
flash picture. Shutter speed
automatically shifts to 1/125
second.
blinks for 3
seconds after flash
Flash has fired at full output and
underexposure may have occurred.
Capture the image again after
confirming focus distance,
aperture, or flash shooting distance
range.
Err blinks
Err blinks
Malfunction detected.
Release the shutter again. If the
warning indication remains, or this
warning appears frequently,
contact your camera dealer.
Top Status LCD
Viewfinder
Cause
Remedy